Rolling code programming, Driver controls – FORD 2012 F-150 Raptor v.2 User Manual

Page 113

Advertising
background image

Note: Programming the system to a community gate will require a
unique set of instructions depending on the gate system model. Contact
the help line on 1-866-572-2728 for further information.

Note: If you accidently enter the program mode by pressing and
releasing the outer two buttons or all three buttons simultaneously, do
not press any button until the module times out after a few seconds and
resets to normal mode. When the module has timed out, all three LED
lamps will flash rapidly for a few seconds then turn off. Any settings
should remain as previously set.

The universal garage door opener
replaces the common hand-held
garage door opener with a
three-button transmitter that is
integrated into the driver’s sun visor.

The system includes two primary
features, a garage door opener and a
platform for remote activation of devices with the home. As well as being
programmed for garage doors, the system transmitter can be
programmed to operate security devices and home lighting systems.

Additional system information can be found on-line at
www.learcar2U.com or by calling the toll-free help line on
1-866-572-2728.

Rolling code programming

Note: If you do not follow the time-sensitive instructions, the device will
time out and you will have to repeat the complete procedure.

Note: It may be helpful to have another person assist you in
programming the transmitter.

1. Switch the ignition on.

Driver Controls

113

2012 F-150 (f12)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: