High beams, Flash-to-pass, Daytime running lamps (drl) (if equipped) – FORD 2012 F-150 Raptor v.2 User Manual

Page 82: Lights

Advertising
background image

High beams

Pull the lever fully past the detent
to activate. Pull the lever fully again
to deactivate.

Flash-to-pass

Pull toward you slightly to activate
and release to deactivate.

Daytime running lamps (DRL) (if equipped)

Turns the headlamps on with a reduced output.

In order for the DRLs to function:
• the ignition must be in the on position and
• the headlamp control is in the

, parking lamp or autolamp position.

WARNING: Always remember to turn on your headlamps at
dusk or during inclement weather. The Daytime Running Lamp

(DRL) system does not activate the tail lamps and generally may not
provide adequate lighting during these conditions. Failure to activate
your headlamps under these conditions may result in a collision.

Lights

82

2012 F-150 (f12)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: