Lights, Headlamp control, Autolamp control (if equipped) – FORD 2012 Focus v.1 User Manual

Page 122: Autolamp delay system (if equipped), Headlamps

Advertising
background image

HEADLAMP CONTROL

Turns the lamps off.

Turns on the parking

lamps, instrument panel lamps,
license plate lamps and tail lamps.

Turns the headlamps on.

Note: The head lamp indicator will illuminate when the head lamps are
activated.

Autolamp control (if equipped)

The autolamp system provides light
sensitive automatic on-off control of
the exterior lights normally
controlled by the headlamp control.
• To turn autolamps on, rotate the

control to

.

• To turn autolamps off, rotate the

control from the autolamp
position.

Note: If the vehicle is equipped with autolamps, it will have the
headlamps on with windshield wipers feature. If the windshield
wipers are turned on, the exterior lamps will turn on with the headlamp
control in the autolamp position.

Autolamp delay system (if equipped)

If your vehicle is equipped with autolamps, you can set the delay time to
keep the headlights on for up to one minute after the key is turned off.
The autolamp delay settings are adjusted through the message center in
the instrument cluster. The default delay time from the factory is set to
20 seconds.

Note: The headlamps can be activated manually by pulling the high
beam/flash-to-pass lever toward you. The headlamps are deactivated
after 30 seconds or three minutes if any door is open.

A

A

Lights

122

2012 Focus (foc)
Owners Guide, 1st Printing
USA
(fus)

Advertising