Battery, Maintenance and specifications – FORD 2012 Focus v.1 User Manual

Page 343

Advertising
background image

2. Press both the accelerator and brake pedals at the same time.

3. Keep both pedals fully pressed.

4. After three seconds, the Service: Oil reset in prog. message will be
displayed.

5. After 25 seconds, the Service: Oil reset complete message will be
displayed.

6. Release both the accelerator and brake pedals.

7. The Service: Oil reset complete message will no longer be
displayed.

8. Rotate the key to the off position.
For vehicles with push-button start, press the START/STOP button to
turn the vehicle off completely.

BATTERY

Your vehicle is equipped with a
Motorcraft

௡ maintenance-free

battery which normally does not
require additional water during its
life of service.

If your battery has a cover/shield, make sure it is reinstalled
after the battery has been cleaned or replaced.

For longer, trouble-free operation, keep the top of the battery clean and
dry. Also, make certain the battery cables are always tightly fastened to
the battery terminals.

If you see any corrosion on the battery or terminals, remove the cables
from the terminals and clean with a wire brush. You can neutralize the
acid with a solution of baking soda and water.

It is recommended that the negative battery cable terminal be
disconnected from the battery if you plan to store your vehicle for an
extended period of time. This will minimize the discharge of your battery
during storage.

Maintenance and Specifications

343

2012 Focus (foc)
Owners Guide, 1st Printing
USA
(fus)

Advertising