Front safety belt height adjustment, Safety belt warning light and indicator chime, Conditions of operation – FORD 2012 Focus v.1 User Manual

Page 190: Seating and safety restraints

Advertising
background image

Front safety belt height adjustment

Adjust the height of the shoulder
belt so the belt rests across the
middle of your shoulder.

To adjust the shoulder belt height,
squeeze the button and slide the
height adjuster up or down. Release
the button and pull down on the
height adjuster to make sure it is
locked in place.

WARNING: Position the safety belt height adjusters so that the
belt rests across the middle of your shoulder. Failure to adjust

the safety belt properly could reduce the effectiveness of the seat belt
and increase the risk of injury in a collision.

Safety belt warning light and indicator chime

The safety belt warning light illuminates in the instrument cluster and a
chime sounds to remind the occupants to fasten their safety belts.

Conditions of operation

If...

Then...

The driver’s safety belt is not
buckled before the ignition
switch is turned to the on
position...

The safety belt warning light
illuminates 1-2 minutes and the
warning chime sounds 4-8 seconds.

The driver’s safety belt is
buckled while the indicator
light is illuminated and the
warning chime is sounding...

The safety belt warning light and
warning chime turn off.

The driver’s safety belt is
buckled before the ignition
switch is turned to the on
position...

The safety belt warning light and
indicator chime remain off.

Seating and Safety Restraints

190

2012 Focus (foc)
Owners Guide, 1st Printing
USA
(fus)

Advertising