Relays, Changing a flat tire, Changing tires – FORD 2010 Crown Victoria v.1 User Manual

Page 199: Roadside emergencies

Advertising
background image

Fuse/Relay

Location

Fuse Amp

Rating

Protected Circuits

208

Not used

209

1

2

ISO relay

Horn

301

Full ISO relay Starter

302

Full ISO relay Air compressor (non-Police vehicles

only), RUN/ACC relay (Police vehicles
only)

303

Full ISO relay Blower

304

Full ISO relay Rear defrost relay

501

Not used

502

Diode

PCM

503

Not used

601

20A Circuit

breaker

Power seats, Lumbar, Decklid (Police
vehicles only)

602

20A Circuit

breaker

RUN/ACC relay feed – Windows, Decklid
(Police vehicles only)

* Mini fuse ** Cartridge fuse

Relays

Relays are located in the power distribution box and should be replaced
by an authorized dealer.

CHANGING A FLAT TIRE

If you get a flat tire while driving:
• do not brake heavily.
• gradually decrease the vehicle’s speed.
• hold the steering wheel firmly.
• slowly move to a safe place on the side of the road.
Your vehicle may be equipped with a conventional spare tire that is
different in one or more of the following: type, brand, size, speed rating
and tread design. If this is the case, this dissimilar spare tire is still rated
for your vehicle loads (GAWR and GVWR). This temporary spare tire is
not equipped with a Tire Pressure Monitor System (TPMS) sensor.

Note: The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare is in use. To restore the full functionality of

Roadside Emergencies

199

2010 Crown Victoria (cro)
Owners Guide, 1st Printing
USA
(fus)

Advertising