Fog lamp control (if equipped), High beams, Flash to pass – FORD 2010 Crown Victoria v.1 User Manual

Page 49: Daytime running lamps (drl) (if equipped), Lights

Advertising
background image

5. At the desired autolamp time delay, place the headlamp switch in the
off position.

• At this point, the exterior lamps turn off and the time delay is set.
Fog lamp control (if equipped)

With the ignition on, the fog lamps
can be turned on when the
headlamp control is pulled toward
you and is in any of the following
positions:
• Parking lamps
• Low beams
• Autolamps (when active)
Fog lamps will turn off when the
high beams are activated.

High beams

Push the lever toward the
instrument panel to activate. Pull
the lever towards you to deactivate.

Flash to pass

Pull toward you slightly to activate
and release to deactivate.

Daytime running lamps (DRL) (if equipped)
Turns the headlamps on with a reduced output. To activate:
• the key must be in the on position,
• the headlamp control is in the off or

position,

Lights

49

2010 Crown Victoria (cro)
Owners Guide, 1st Printing
USA
(fus)

Advertising