Engine oil, Checking the engine oil, Maintenance and specifications – FORD 2010 Flex v.2 User Manual

Page 348

Advertising
background image

4. Attach the new wiper to the
wiper arm and press it into place
until a click is heard.

If you find this procedure too
difficult, please see your dealer.

ENGINE OIL

Checking the engine oil

Refer to the scheduled maintenance information for the appropriate
intervals for checking the engine oil.

1. Make sure the vehicle is on level ground.

2. Turn the engine off and wait 15 minutes for the oil to drain into the
oil pan.

3. Set the parking brake and ensure the gearshift is securely latched in P
(Park).

4. Open the hood. Protect yourself from engine heat.

5. Locate and carefully remove the
engine oil level dipstick.

6. Wipe the dipstick clean. Insert the dipstick fully, then remove it again.
• If the oil level is within this

range, the oil level is acceptable.
DO NOT ADD OIL.

Maintenance and Specifications

348

2010 Flex (471)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: