FORD 2010 Flex v.2 User Manual
Page 375
Advertising
B. Clean the area around the clamp
that connects the air filter assembly
to the rubber hose (1).
C. Remove the bolt cover (if
equipped).
D. Remove two bolts that attach the air filter assembly to the front of
the vehicle (2).
E. Loosen the clamp holding the air filter assembly to the rubber hose
(1).
F. Remove the harness retaining clip by pulling up (3). Do not
disconnect the mass airflow sensor (4).
G. Without disconnecting the mass airflow sensor (4), pull the air filter
assembly up to disconnect the air filter assembly from the seated
grommets located underneath the air filter assembly.
1
4
3
2
Maintenance and Specifications
375
2010 Flex (471)
Owners Guide, 2nd Printing
USA (fus)
Advertising
This manual is related to the following products: