Changing a flat tire, Changing tires, Roadside emergencies – FORD 2009 Escape v.3 User Manual

Page 235

Advertising
background image

Fuse/Relay

Location

Fuse Amp

Rating

Protected Circuits

31F

Liftgate latch relay

32

Not used

33

PCM diode

34

Start diode

35

10A*

Run/start, Reverse lamps, Rear
defrost relay

36

Not used

37

Not used

* Mini fuse ** Cartridge fuse

CHANGING A FLAT TIRE

If you get a flat tire while driving:
• do not brake heavily.
• gradually decrease the vehicle’s speed.
• hold the steering wheel firmly.
• slowly move to a safe place on the side of the road.
Your vehicle may be equipped with a conventional spare tire that is
different in one or more of the following: type, brand, size, speed rating
and tread design. If this is the case, this dissimilar spare tire is still rated
for your vehicle loads (GAWR and GVWR). This temporary spare tire is
not equipped with a tire pressure monitor system (TPMS) sensor.

Note: The tire pressure monitoring system (TPMS) indicator light will
illuminate when the spare is in use. To restore the full functionality of
the TPMS system, all road wheels equipped with the tire pressure
monitoring sensors must be mounted on the vehicle.

Have a flat tire serviced by an authorized dealer in order to prevent
damage to the TPMS sensor, refer to Tire pressure monitoring system
(TPMS)
in the Tires, Wheels, and Loading chapter. Replace the spare
tire with a road tire as soon as possible. During repairing or replacing of
the flat tire, have the authorized dealer inspect the TPMS sensor for
damage.

WARNING: The use of tire sealants may damage your tire
pressure monitoring system and should not be used.

Roadside Emergencies

235

2009 Escape (204)
Owners Guide (own2002), 3rd Printing
USA
(fus)

Advertising