Instantaneous fuel economy, Setup menu, Driver controls – FORD 2009 Escape v.3 User Manual

Page 74

Advertising
background image

If you calculate your average fuel economy by dividing miles traveled by
gallons of fuel used (liters of fuel used by 100 kilometers traveled), your
figure may be different than displayed for the following reasons:
• your vehicle was not perfectly level during fill-up
• differences in the automatic shut-off points on the fuel pumps at

service stations

• variations in top-off procedure from one fill-up to another
• rounding off the displayed values to the nearest 0.1 gallon (liter)
1. Drive the vehicle at least 5 miles (8 km) with the speed control
system engaged to display a stabilized average.

2. Record the highway fuel economy for future reference.

It is important to press the RESET control after setting the speed
control to get accurate highway fuel economy readings.

Instantaneous fuel economy

Select this function from the INFO
menu to display your instantaneous
fuel economy. This will display your
fuel economy as a bar graph ranging
from

poor economy to

excellent economy.

Your vehicle must be moving to calculate instantaneous fuel economy.
When your vehicle is not moving, this function shows

, one or no bars

illuminated. Instantaneous fuel economy cannot be reset.

Setup menu

Press this control for the following
displays:
• Reset to English (if in another

language)

• System Check
• Oil Life
• Units (English/Metric)
• Autolamp Sec (if equipped)
• Autolock (if equipped)
• Autounlock (if equipped)

Driver Controls

74

2009 Escape (204)
Owners Guide (own2002), 3rd Printing
USA
(fus)

Advertising