Autolock, Autounlock, Language – FORD 2009 Escape v.3 User Manual

Page 77: Compass zone/compass calibration, System warnings, Driver controls

Advertising
background image

2. Press the RESET control to select the new Autolamp delay values of
0, 10, 20, 30, 60, 90, 120 or 180 seconds.

Autolock

This feature automatically locks all vehicle doors when the vehicle is
shifted into any gear, putting the vehicle in motion.

1. To disable/enable the autolock
feature, select this function from the
SETUP control for the current
display mode.

2. Press the RESET control to turn
the autolock ON or OFF.

Autounlock

This feature automatically unlocks all vehicle doors when the driver’s
door is opened within 10 minutes of the ignition being turned off.

1. To disable/enable the autounlock
feature, select this function from the
SETUP control for the current
display mode.

2. Press the RESET control switch
to turn the autounlock ON or OFF.

Language

1. Select this function from the
SETUP menu for the current
language to be displayed.

2. Waiting four seconds or pressing
the RESET control cycles the
message center through each of the language choices.

Selectable languages are English, Spanish, or French.

3. Press and hold the RESET control for two seconds to set the language
choice.

Compass zone/Compass calibration

Refer to Electronic compass in the this chapter.

System warnings

System warnings alert you to possible problems or malfunctions in your
vehicle’s operating systems.

Driver Controls

77

2009 Escape (204)
Owners Guide (own2002), 3rd Printing
USA
(fus)

Advertising