Replacing fog lamp bulbs (if equipped), Lights – FORD 2009 Escape v.3 User Manual
Page 56
Advertising
Replacing fog lamp bulbs (if equipped)
1. Make sure the fog lamp switch is
in the off position.
2. From underneath the vehicle,
carefully disconnect the electrical
connector from the bulb.
3. Remove the bulb from the lamp
assembly by pulling out the bulb
while squeezing the upper and lower
snap clips at the same time.
Install the new bulb in reverse
order.
Lights
56
2009 Escape (204)
Owners Guide (own2002), 3rd Printing
USA (fus)
Advertising