Casio WK6500E1A - Manual (Page 102)

Using the Function Menu
E-100
Specifies whether the Digital Keyboard should remember its
setup when turned off and restore it the next time it is turned
on.
• For information about the setting items that are restored
when Auto Resume is enabled, see “Parameter List” (page
E-127).
• Initially, power on default settings are the same as the
factory default settings. You also can use the procedure
below to specify other power on default settings to suit your
needs.
You can use this setting item to do the following.
• Rewrite the power on default settings with the Digital
Keyboard’s current setup (registering default settings).
• Return the power on default settings to the factory default
settings (clearing default settings).
■ To register or clear default settings
1.
Press the R-13 (FUNCTION) button to display
the function menu.
2.
Use the R-17 (i, y) buttons to move the 0 to
“General” and then press the R-16 (ENTER)
button.
3. Use the R-17 (t, y) button to move the 0 to
“Default” and then press the R-16 (ENTER)
button.
• This displays the default setting screen like the one
shown below.
4. Use the R-17 (t, y) buttons to select the
operation you want.
• For information about the setting items that are
registered as default settings, see “Parameter List”
(page E-127).
5.
After everything is the way you want, press the
R-16 (ENTER) button.
• The message “Complete” appears and the display
returns to the screen before you pressed the R-16
(ENTER) button in step 3.
6. To exit the function menu, press the R-13
(FUNCTION) button.
• If you want the default settings to be restored whenever
power is turned on, select “oFF” for the “AutoResume”
setting (page E-100).
This item can be used to initialize all data and settings, or
parameter settings only.
• For information about what settings are initialized when
“Parameter” is selected for initialization in step 4 of the
procedure below, see “Parameter List” (page E-127).
AutoResume (Auto Resume)
oFF
*
: Restores power on defaults when power is turned on.
on : Remembers setup when power is turned off and
restores it when power is turned back on.
Default (Default Settings)
To do this: Move the 0 here:
Return the power on default settings
to the factory default settings (clearing
default settings). Clear
Rewrite the power on default settings
with the Digital Keyboard’s current
setup (registering default settings). Store
Initialize (Initialize)
CTK6000_e.book 100 ページ ２０１０年７月１２日 月曜日 午後１２時５０分