Casio WK6500E1A - Manual (Page 110)

Using a Memory Card
E-108
You can use the Digital Keyboard to play music files you
saved to a memory card with your computer.
• Supported music files are SMF format 0 or 1 MIDI files
(MID).
• Playback of audio files (WAV, MP3, etc.) is not
supported.
• At the same time playback starts, the transpose setting
(page E-18) will change to 00 and the local control setting
(page E-99) will change to “on”.
1.
Format the memory card on the Digital
Keyboard (page E-103).
• This will cause a folder named MUSICDAT to be
automatically created in the memory card root
directory.
2. Use your computer to copy the music file you
want to play to the MUSICDAT file that was
created in step 1.
• See the “Important!” note above for information about
supported file types.
3. Insert the memory card into the card slot.
4. Press the C-7 (CARD) button to enter the card
mode.
5. Use the dial or R-14 (–, +) buttons to select the
music file you want to play.
6.
To start playback, press the L-17 (PLAY/STOP)
button.
• To perform a fast forward operation, hold down the
L-15 (dFF) button. The measure number in the lower
right corner of the display scrolls at high speed while
the L-15 (dFF) is depressed. Releasing the button
immediately resumes normal playback from that point.
• To perform a fast backward operation, hold down the
L-14 (sREW) button. Sound is muted and the
measure number in the lower right corner of the display
scrolls at high speed while the L-14 (sREW) is
depressed. Releasing the button immediately resumes
normal playback from the beginning of the measure
whose number is displayed.
• Pressing the L-16 (PAUSE) button pauses playback.
Press again to resume playback.
7.
To stop playback, press the L-17 (PLAY/STOP)
button.
R-14 R-14
C-7 C-7
L-17 L-17
L-18 L-18 L-16 L-16
L-15 L-15
L-14 L-14
L-13 L-13
L-8 L-8
L-9 L-9 R-16 R-16
R-17 R-17
Playing a Music File from a
Memory Card
To play a music file from a memory card
CTK6000_e.book 108 ページ ２０１０年７月１２日 月曜日 午後１２時５０分