Clutch fluid (if equipped), Maintenance and specifications – FORD 2006 F-150 v.2 User Manual

Page 307

Advertising
background image

CLUTCH FLUID (IF EQUIPPED)

Check the fluid level. Refer to scheduled maintenance information for
the service interval schedules.

During normal operation, the fluid level in the clutch reservoir should
remain constant. If the fluid level drops, refill the fluid level to the step
in the reservoir.

Use only a DOT 3 brake fluid designed to meet Ford specifications. Refer
to Lubricant specifications in this chapter.

Brake fluid is toxic. If brake fluid contacts the eyes, flush eyes
with running water for 15 minutes. Seek medical attention if

irritation persists. If taken internally, drink water and induce vomiting.
Seek medical attention immediately.

1. Clean the reservoir cap before
removal to prevent dirt and water
from entering the reservoir.

2. Remove cap and rubber
diaphragm from reservoir.

3. Add fluid until the level reaches
the step in the reservoir.

4. Reinstall rubber diaphragm and
cap onto reservoir.

2006 F-150 (f12)
Owners Guide (post-2002-fmt)
USA
(fus)

Maintenance and Specifications

307

Advertising