Engine data, Maintenance and specifications – FORD 2006 F-150 v.2 User Manual

Page 321

Advertising
background image

2

Ensure the correct automatic transmission fluid is used. Transmission

fluid requirements are indicated on the dipstick or on the dipstick
handle. Check the container to verify the fluid being added is of the
correct type. Refer to your scheduled maintenance information to
determine the correct service interval.

Some transmission fluids may be labeled as dual usage, such as
MERCON

௡ and MERCON௡ V. These dual usage fluids are not to be used

in an automatic transmission that requires use of the MERCON

௡ type

fluid.

MERCON

and MERCONV type fluids are not interchangeable.

DO NOT mix MERCON

and MERCONV. Use of a transmission

fluid that indicates dual usage (MERCON

and MERCONV) in

an automatic transmission application requiring MERCON

may

cause transmission damage. Use of any fluid other than the
recommended fluid may cause transmission damage.

ENGINE DATA

Engine

4.2L V6 engine

4.6L V8 engine

5.4L V8 engine

Cubic inches

256

281

330

Required fuel

87 octane

87 octane

87 octane or
Ethanol (E 85)

2

Firing order

1-4-2-5-3-6

1-3-7-2-6-5-4-8

1-3-7-2-6-5-4-8

Ignition system

EDIS

Coil on plug

Coil on plug

Spark plug gap

0.052–0.056 inch
(1.32–1.42mm)

0.052–0.056 inch
(1.32–1.42mm)

0.040–0.050 inch
(1.02–1.28mm)

1

Compression
ratio

9.3:1

9.37:1

9.85:1

1

The 5.4L 3V spark plug gap can’t be adjusted.

2

5.4L 3V FFV engines only.

2006 F-150 (f12)
Owners Guide (post-2002-fmt)
USA
(fus)

Maintenance and Specifications

321

Advertising