Climate controls, Heater only system (if equipped), Operating tips – FORD 2006 F-150 v.2 User Manual

Page 46: Heater only

Advertising
background image

HEATER ONLY SYSTEM
(IF EQUIPPED)

1. Fan speed adjustment: Controls
the volume of air circulated in the
vehicle.

2. Temperature selection:
Controls the temperature of the
airflow in the vehicle.

3. Air flow selections: Controls the direction of the airflow in the
vehicle. See the following for a brief description on each control.

: Distributes outside air through the instrument panel vents.

: Distributes outside air through the instrument panel vents and the

floor vents.

(OFF): Outside air is shut out and the climate system is turned off.

: Distributes outside air through the floor vents.

: Distributes outside air through the windshield defroster vents and

floor vents.

: Distributes outside air through the windshield defroster vents and

demister vents. Can be used to clear the windshield of fog and thin ice.

Operating tips
• To reduce fog build up on the windshield during humid weather, place

the air flow selector in the

position.

• Do not put objects under the front seats that will interfere with the air

flow to the back seats.

• To reduce humidity build-up inside the vehicle, do not drive in

the

(OFF) position.

• Under normal weather conditions, do not leave the airflow selector

in

(OFF). This allows the vehicle to breathe using the outside air

inlets.

• Remove any snow, ice or leaves from the air intake area at the base of

the windshield.

To aid in side window defogging/demisting in cold weather:

1. Select

.

2. Adjust the temperature control to maintain comfort.

2006 F-150 (f12)
Owners Guide (post-2002-fmt)
USA
(fus)

Climate Controls

46

Advertising