Controls and features – FORD 2002 Explorer v.2 User Manual
Page 122
JOBNAME: T14191ExplOG-US PAGE: 122 SESS: 12 OUTPUT: Tue Aug 26 14:27:29 2014
/restores/ford/ownguide/14191e-exp/og
If you wish to erase your personal code, use the following instructions:
Erasing personal code
1. Enter the factory-set code.
2. Press 1/2 within five seconds of
step 1 and release.
3. Press the 1/2 control and hold for
2 seconds to erase the customer
programmed keycode, within five
seconds of step 2.
The system will now only respond
to the factory-set code.
Anti-scan feature
The system will ignore keypad
presses for one minute if the user
has pressed it 35 times without
entering a valid code. This feature is
to prevent unauthorized entry.
During the anti-scan operation the
keypad lamp will flash.
Anti-scan will be turned off after:
• one minute of keypad inactivity
• the keyfob UNLOCK button is
pressed.
• the ignition is turned to the ON
position
Controls and features
122