FORD 2002 Explorer v.2 - Manual (Page 126)

JOBNAME: T14191ExplOG-US PAGE: 126 SESS: 12 OUTPUT: Tue Aug 26 14:27:29 2014
/restores/ford/ownguide/14191e-exp/og
PERIMETER ALARM SYSTEM (IF EQUIPPED)
The perimeter anti-theft system will help prevent your vehicle from
unauthorized entry.
If there is any potential perimeter anti-theft problem with your vehicle,
ensure ALL key fobs (remote entry transmitters) are brought to the
dealership, to aid in troubleshooting.
Power door trim switch inhibit
This feature disables the power door locks and liftgate power door lock
control switches if all doors are closed and the perimeter alarm becomes
armed.
Once the locks are disabled, they only become active when the perimeter
alarm is disarmed or a door, liftgate, liftgate window or hood is open.
Deactivating/activating power door trim switch inhibit
1. Steps 2 through 4 should be
completed within 30 seconds.
2. Turn the ignition key to ON, then
press the UNLOCK button 3 times.
3. Turn the ignition key to OFF,
then press the UNLOCK button 3
times.
4. Turn the ignition key to ON, horn will chirp once to confirm
programming mode is entered.
5. Within 5 seconds of step 4, press the LOCK button 2 times to change
state.
6. The user should receive 2 horn chirps to indicate the system has been
disabled, or 2 horn chirps followed by a honk to indicate the system has
been enabled.
7. Turn ignition to OFF to exit programming. A horn chirp will follow if
the state has been changed.
Arming the system
When armed, this system will help protect your vehicle from
unauthorized entry. When unauthorized entry occurs, the system will
flash the headlamps and/or parking lamps, and will chirp the horn.
Controls and features
126