FORD 2002 Focus v.3 - Manual (Page 147)

Seating and Safety Restraints
147
Your vehicle is equipped with a
safety belt parking feature for the
driver and front passenger. The
purpose of the parking feature is to
allow the driver or passenger to
reach the safety belt. Fasten your
seatbelt normally and the parking
feature will activate itself. Pull the
safety belt backwards, overcoming
its parking feature, to allow easier
entry to the rear seats.
Safety belt warning light and
warning chime
Illuminates in the instrument
cluster and a chime sounds to
remind the driver to fasten his or
her safety belt.
Conditions of operation
If... Then...
If the driver's safety belt is not
buckled before the ignition switch
is turned to the ON/RUN position
...
The Safety belt warning light
illuminates for one to two minutes
and the warning chime sounds for
four to eight seconds.
The driver's safety belt is buckled
while the indicator light is
illuminated and the warning chime
is sounding...
The Safety belt warning light and
warning chime turn off.
The driver's safety belt is buckled
before the ignition switch is turned
to the ON/RUN position ...
The Safety belt warning light and
warning chime remain off.