Lights – FORD 2002 Focus v.3 User Manual
Page 78
Lights
78
5. Locate the vertical adjuster on
each headlamp. Using a 7 mm Allen
head wrench, turn the adjuster
either clockwise (to adjust down)
or counterclockwise (to adjust up).
The high intensity area should
touch the horizontal reference line.
Note: HORIZONTAL AIM IS NOT
REQUIRED FOR THIS VEHICLE
AND IS NONĆADJUSTABLE.
6. Close the hood and turn off the
lamps.
VOL
On vehicles fitted with
VOL (HID) headlamps,
have your Ford Dealer change the
headlamp bulbs. There is a risk of
injury due to high voltage.
1. Park the vehicle on a level
surface approximately 7.6 meters
(25 feet) from a vertical wall or
screen directly in front of it.
2. Measure the height of the
headlamp bulb center from the
ground, subtract 53.3 mm
(2.1 inches), and make a 2.5 meters
(8 foot) horizontal reference line on
the vertical wall or screen at this
height. (A piece of masking tape
works well.)
3. Open the hood.
4. Remove the battery cover.