Seating and safety restraints – FORD 2002 Focus v.3 User Manual
Page 154
Advertising
Seating and Safety Restraints
154
Safety belt extension assembly
If the safety belt is too short, even
when fully extended, 20 cm
(8 inches) can be added to the
safety belt assembly by adding a
safety belt extension assembly
(part number 611C22). Safety belt
extension assemblies can be
obtained from your dealer at no
cost.
Use only extensions manufactured
by the same supplier as the safety
belt. Manufacturer identification is
located at the end of the webbing
on the label.
Also, use the safety belt extension
only if the safety belt is too short
for you when fully extended. Do not
use extensions to change the fit of
the shoulder belt across the torso.
Advertising