FORD 2002 Focus v.3 - Manual (Page 79)

Lights
79
5. Remove the headlamp bulb
cover by releasing the four snap
hooks (two top and two bottom).
Note: On the left headlamp, pull
the bulb cover approx. 1 inch
rearward and then slide outboard
until the vertical aiming adjuster is
accessible.
6. Turn on the low beam to
illuminate the wall or screen. On
the wall or screen you will observe
an area of high intensity light. If the
left side of each light pattern is not
at the reference line, the beam
needs to be adjusted.
7. The adjusting screw has a
thumb wheel that can be operated
by hand. Turn the aiming screw
clockwise for upward movement
and counterĆclockwise for
downward movement.
Note: HORIZONTAL AIM IS NOT
REQUIRED FOR THIS VEHICLE
AND IS NON-ADJUSTABLE..
8. Turn off the headlamp.
9. Attach the headlamp bulb
covers.
Insure that all four snap
hooks are engaged (click
sound).
10.Attach the battery cover.
11.Close the hood.