FORD 2001 Mustang - Manual (Page 207)

Fluid Ford Part Name Application Capacity
Rear axle
lubricant
2
Motorcraft SAE
80W-90 Premium
Rear Axle
Lubricant 7 .5 inch axle 1.5L (3.25 pints)
Motorcraft SAE
75W-140
Synthetic Rear
Axle Lubricant 8.8 inch axle 2.0L (4.25 pints)
Fuel tank N/A All 59.4L (15.7
gallons)
Transmission fluid
3
Motorcraft
MERCON
௡V ATF
Automatic with
3.8L OHV V6
engine 13.1L (13.9
quarts)
4
Automatic with
4.6L SOHC V8
engine 12.0L (12.8
quarts)
4
Motorcraft
MERCON
௡ ATF
Manual with 3.8L
OHV V6 engine 2.6L (5.6 pints) 5
Mobil 1
Synthetic
௡ ATF
Manual with 4.6L
SOHC V8 engine 3.8L (8.0 pints) 5
Windshield
washer fluid Ultra-Clear
Windshield
Washer
Concentrate All 3.8L (4.0 quarts)
1 Add the coolant type originally equipped in your vehicle.
2 Rear axle lubricants do not need to be checked or
changed unless a leak is suspected, service is required or
the axle assembly has been submerged in water. The axle
lubricant should be changed any time the rear axle has
been submerged in water. Fill 6 mm to 14 mm (1/4 inch to
9/16 inch) below bottom of fill hole. Add 118 ml (4 oz.) of
Additive Friction Modifier C8AZ-19B546-A or equivalent
meeting Ford specification EST-M2C118–A for complete
refill of Traction-Lok axles.
3 Ensure the correct automatic transmission fluid is used.
Transmission fluid requirements are indicated on the
dipstick or on the dipstick handle. MERCON
௡ and
MERCON ௡ V are not interchangeable. DO NOT mix
MERCON ௡ and MERCON௡ V. Refer to your scheduled
maintenance guide to determine the correct service
interval.
4 Indicates only approximate dry-fill capacity. Some
applications may vary based on cooler size and if equipped
with an in-tank cooler. The amount of transmission fluid
and fluid level should be set by the indication on the
dipstick’s normal operating range.
Capacities and specifications
207