FORD 2001 Mustang - Manual (Page 209)

Item Ford part name Ford part
number Ford
specification
Automatic
transmission fluid Motorcraft
MERCON
௡V ATF
2
XT-5-QM MERCON ௡V
3.8L Manual
transmission fluid Motorcraft
MERCON
௡ ATF
XT-2-QDX MERCON ௡
4.6L Manual
transmission fluid Mobil 1
Synthetic
௡ ATF
N/A N/A
Disc brake caliper
rails Silicone Brake
Caliper Grease
and Dielectric
Compound D7AZ-19A331-A
(Motorcraft
WA-10) ESE-M1C171-A
Windshield
washer fluid Ultra-clear
Windshield
Washer
Concentrate C9AZ-19550-AC ESR-M17P5-A
1 Add 118 ml (4 oz.) of Additive Friction Modifier
C8AZ-19B546-A or equivalent meeting Ford specification
EST-M2C118-A for complete refill of Traction-Lok axles.
Ford design rear axles contain a synthetic lubricant that
does not require changing unless the axle has been
submerged in water.
2 Ensure the correct automatic transmission fluid is used.
Transmission fluid requirements are indicated on the
dipstick or on the dipstick handle. MERCON
௡ and
MERCON
௡ V are not interchangeable. DO NOT mix
MERCON
௡ and MERCON௡ V. Refer to your scheduled
maintenance guide to determine the correct service
interval.
ENGINE DATA
Engine 3.8L OHV V6 engine 4.6L SOHC V8 engine
Cubic inches 232 281
Required fuel 87 octane 87 octane
Firing order 1-4-2-5-3-6 1-3-7-2-6-5-4-8
Spark plug gap 1.3-1.4 mm
(0.052-00.056 inch) 1.3-1.4 mm
(0.052-00.056 inch)
Ignition system EDIS Coil on plug
Compression ratio 9.4:1 9.4:1
Capacities and specifications
209