Iris Sample Processing StatSpin® CytoFuge 12 Versatile Cytocentrifuge System - Manual (Page 6)

1
Section
1
Unpacking and Installation
Inspect Packaging
The Cytofuge ® 12 Cytocentrifuge and its accessories are delivered in a single carton. If the cytocentrifuge or
accessories have been damaged in transport, please inform your carrier immediately.
NOTE: Save the shipping carton and packing materials to facilitate return should service be required.
Verify Contents
The package contains:
One Cytofuge ® 12 Cytocentrifuge (CF12)
One cytocentrifuge rotor (CFRT-12)
One Accesory Carton
The Accesory Carton consists of:
One line cord (for use in North America only).
One Operator’s Manual CD
One latch release tool
3-well Cell Concentrators and 3-well gaskets
pkg of 4, (CC03)
1-well Cell Concentrators and 1-well gaskets
pkg of 4, (CC01)
Stainless Steel Clips for Cell Concentrators
pkg of 8, (CLIP)
Backing Plates for Cell Concentrators
pkg of 4, (BP01)
Filter Concentrators
2 bags of 4 each (FF01)
Stainless Steel Clips for Filter Concentrators
3 pkgs of 4, (FFCL)
Install
o Place the cytocentrifuge on a solid level surface suitable for operation of laboratory instrumentation.
CAUTION - Do not place the cytocentrifuge on top of other equipment and do not place other
objects or equipment on top of the cytocentrifuge.
o Position the cytocentrifuge out of direct sunlight and away from sources of intense heat or cold.
Improper conditions can cause damage to the housing, rendering unit unsafe to operate.
o See the Appendix for the acceptable range of operating temperature and humidity.
o Remove the foam shipping retainer around the rotor before operating the cytocentrifuge.
WARNING - Maintain a 300 mm (11.8 inches) clearance envelope around cytocentrifuge during
operation.
Do not deposit any potentially hazardous materials within the CLEARANCE ENVELOPE.