ITC Hemochron Signature+ Whole Blood Microcoagulation System - Manual (Page 28)

28
c. Enter information about your institution and COM port used (if needed), then click OK. The
User Master File Maintenance dialog box is displayed:
d. To change the default user name and password, click Add and enter a new user name and
password, being sure that the Yes button is selected for Supervisor access. Click Save, then
select the previous record containing the default user name and password and click Delete.
Note: The default user name and password should be changed as shown above. All
commands are accessible to anyone until then.
e. Click
Exit. A prompt to import data from an earlier version of HEMOCHRON Configuration
Manager software is displayed:
f. Click Yes or No as appropriate.
3.
Thereafter, click Start Program to display the Logon dialog box:
4.
Enter your user name and password.