CMA Dishmachines CMA-44 - Manual (Page 10)

Getting Started
2.3.5. Pump Impeller Note
Figure 2.2.5
Installation:
When installing the water pump impeller the Nylon Lock Nut indicated by the arrow
in
Figure 2.2.5 must be in place to prevent the impeller from spinning off of the shaft
and damaging the motor.
Removal:
The Nylon Lock Nut indicated by the arrow in Figure 2.2.5 must be removed before
attempting to remove the water pump impeller.
MODEL CMA-44 Installation & Operation Manual Rev. 2 .15 10/18/07 Page 9