CMA Dishmachines CMA-44 - Manual (Page 12)

Getting Started
2.3.7. Optional Freestanding Scrap Trap and Adaptor Kit
The optional Freestanding Scrap Trap (P/N 01560.00) and Adaptor Kit (P/N
13512.00) are available for installations where the space is insufficient to
accommodate the standard side-mounted scrap trap or where drain access is easier
by locating the scrap trap some distance away from the Dishmachine.
*
ITEM
NO.
NO.
REQ’D
P/N DESCRIPTION
ITEM
NO.
NO.
REQ’D
P/N DESCRIPTION
1 11 00912.00 1/4-20 Nylon Lock Nut 5 1 13511.26 Overflow Gasket
2 1 01307.00 Scrap Trap Flange Nut 6 2 00914.00 1/4-20 x 3/4" Hex Head Bolt
3 1 01308.00 Scrap Trap Flange Gasket 7 1 13512.00 Scrap Trap Adaptor
4 1 13512.10 Scrap Trap Adaptor Flange 8 1 01560.00 Scrap Trap, Freestanding
* Not Supplied
MODEL CMA-44 Installation & Operation Manual Rev. 2 .15 10/18/07 Page 11