Canon LV-7275 EN - Manual (Page 68)

9
. Usng On-Screen Menu
[Menu]
Selectng Menu Color [Color select]
You can choose between two color modes for menu color: Color and Monochrome.
Selectng Menu Dsplay Tme [Dsplay tme]
This option allows you to select how long the projector waits after the last touch of a button to turn off the menu.
The preset choices are Manual, 5 sec, 15 sec, and 45 sec.
Selectng a Color for Background [No sgnal screen]
Use this feature to display a blue, black screen or the Canon logo screen when no signal is available.
Selectng Interval Tme for Flter Message [Flter message]
The projector has a feature that informs you of the timing for cleaning the filters.
This item allows you to select the time preference between displaying the message for cleaning the filters. Clean
the filter when you get the message "Please clean filter." See page
67 .
Five options are available: Off, 100(H), 200(H), 500(H), 1000(H)
The default setting is 500(H). Change the interval time depending on the degree of dust and dirt on the filters.
NOTE:
1) The message for lamp replacement and filter cleaning will be displayed under the following conditions:
- one minute after the projector has been powered on.
- when the POWER button on the projector cabinet or on the remote control is pressed.
To cancel the message, press any button on the projector cabinet or the remote control.
2) Your setting will not be affected even when [Reset] is done from the menu.