Selecting aspect ratio [aspect – Canon LV-7275 EN User Manual

Page 63

Advertising
background image



. Usng On-Screen Menu

Selectng Aspect Rato [Aspect]

The term “aspect ratio” refers to the ratio of width to height of a projected image.
The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio.
• This table shows typical resolutions and aspect ratios that most computers support.

Resolution

Aspect Ratio

VGA

640 x 480

4:3

SVGA

800 x 600

4:3

XGA

1024 x 768

4:3

WXGA

1280 x 768

15:9

WXGA

1280 x 800

16:10

WXGA+

1440 x 900

16:10

SXGA

1280 x 1024

5:4

SXGA+

1400 x 1050

4:3

UXGA

1600 x 1200

4:3

Options

Function

Auto

The projector will automatically determine the incoming signal and display it in its
aspect ratio. (

next page

)

The projector may erroneously determine the aspect ratio depending on its signal. If
this occurs, select the appropriate aspect ratio from the following.

4:3

The image is displayed in 4:3 aspect ratio.

16:9

The image is displayed in 16:9 aspect ratio.

15:9

The image is displayed in 15:9 aspect ratio.

16:10

The image is displayed in 16:10 aspect ratio.

Wide zoom
(LV-7375/LV-7370/
LV-7275)

The image is stretched left and right.
Parts of the displayed image are cropped at the left and right edges and therefore not
visible.

Letterbox
(LV-8300)

The image of a letterbox signal is stretched equally in the horizontal and vertical direc-
tions to fit the screen. Parts of the displayed image are cropped at the top and bottom
edges and therefore not visible.

True size

The projector displays the current image in its true resolution when the incoming com-
puter signal has a lower resolution than the projector’s native resolution.

[Example ] When the incoming
signal with the resolution of 800 x
600 is displayed on the LV-7375/LV-
7370/LV-7275:

[Example ] When the incoming
signal with the resolution of 800 x
600 is displayed on the LV-8300:

NOTE:

• When a non-computer signal is displayed, the [True size] is not available.
• When a signal with a higher resolution than the projector’s native resolution is displayed, [True

size] is not available.

Advertising
This manual is related to the following products: