Cable Electronics e labs SW808HD - Manual (Page 5)

Matrix Switching System—Instruction Manual Page 1
Matrix System Overview
Matrix System
The Matrix Switch is a high performance system used to switch audio/video
frequencies. It will cross switch multiple input/output audio/video signals through
independent Y/Pb/Pr component and audio input/output terminals. Each Y/Pb/Pr component
signal and audio signal is transmitted separately and switched separately, thereby minimizing
signal attenuation and ensuring high definition graphics and high fidelity audio signal output.
The primary use is; TV broadcasting projects, multi-media conference halls, large display
projects, TV teaching, and command control centers. It features power interruption
protection during power surge, LCD display, and synchronous and separate audio/video
switching functions. The RS-232 and RS-485 communication ports enable convenient
communication with remote control equipment. This manual describes the SW404HD and
SW808HD models.
Matrix System Models
Technical Parameters
Model Video
Input Port
Video
Output Port
Audio
Input Port
Audio
Output Port
RS-485
Connector
RS-232
Connector
SW404HD 4 4 4 4
√ √
SW808HD 8 8 8 8
√ √
Matrix System Packing
When unpacking, ensure the following items are found:
‰ One SW XXX HD Matrix
‰ One RS-232 cable
‰ One power cable
‰ One testing and application CD
‰ One user manual
‰ Two green terminals
Matrix Host Installation
The SW XXX HD Matrix should be placed on a sturdy desk or installed on a 19-in rack.