Cable Electronics e labs SW808HD - Manual (Page 9)

Matrix Switching System—Instruction Manual Page 5
Connection Method
The audio inputs and outputs can be separately connected to audio signal connectors of video
recorders and multiplexers.
Use the RCA cables for connecting AV equipment to the matrix. Connect the video and audio
connectors of the signal source equipment output terminals to the same channel connector of
the matrix input terminals. Connect the output of the matrix switch to the input connectors of the
interfaced equipment.
NOTE: The colors at both ends of the various signal cables must correspond to each
other, otherwise loss of color reproduction or even no signal output could
occur.
Control Computer Connection
Use the RS-232 cable (supplied) to connect the computer serial port to the RS-232
communication port of the matrix host. The computer can then be used to control the
matrix after installation of application software.
Matrix and Computer Connection
Remote Control Methods and Settings
The matrix provides standard RS-232 and RS-485 serial communication ports. The matrix
switching operation may be controlled locally using the front panel keys or remotely
through the RS-232 or RS-485 serial communication.
Matrix Switch
RS-232
DCE