FRIGIDAIRE FPHS2399PF - Manual (Page 7)

7
DOOR REMOVAL INSTRUCTIONS
Getting through narrow spaces
If your refrigerator will not fit through an
entrance area, you can reduce its size by
removing the doors. Check first by measuring
the entrance.
To prepare for removing the doors:
1 Make sure the electrical power cord is
unplugged from the wall outlet.
2 Open both doors and remove the toe grille
(as explained in the Installation Instructions
that came with your appliance).
3 Remove any food from the door shelves.
4 Close the doors.
To remove the refrigerator top
hinge cover:
1 Remove the three screws from each cover
over the top door hinges.
2 Lift hinge cover straight up and off.
To remove the refrigerator door:
1 Trace lightly around the door’s top hinge with
a pencil. This makes reinstallation easier.
Rear Cover
Screw
Front Cover
Screws
Top
Hinge
Cover
Hinge
Screws
Top
Hinge
Phillips™
Head
Tools Necessary:
Socket
Wrench Set
Adjustable
Wrench
3/8" Fixed
Wrench
Top Hinge
Cover Front
Screw
Top
Hinge
Screw
Bottom
Hinge
Screw
Top Hinge
Cover Rear
Screw
or
or
2 Remove the two screws from the top
hinge. Lift the door off of the bottom
hinge and set it aside.