3 event tracing, 1 snmp notifications – Acronis Backup for Linux Server - User Guide User Manual

Page 175

Advertising
background image

175

Copyright © Acronis International GmbH, 2002-2014

10.6.3 Event tracing

It is possible to send log events generated by the agent(s), operating on the managed machine, to
the specified SNMP managers. If you do not modify the event tracing options anywhere except for
here, your settings will be effective for each local backup plan and each task created on the machine.

You can override the settings set here, exclusively for the events occurred during backup or during
recovery (see Default backup and recovery options.) In this case, the settings set here will be
effective for operations other than backup and recovery, such as archive validation or cleanup.

You can further override the settings set in the default backup and recovery options, when creating a
backup plan or a recovery task. The settings you obtain in this case will be plan-specific or
task-specific.

10.6.3.1 SNMP notifications

This option is effective for both Windows and Linux operating systems.

This option is not available when operating under the bootable media.

The option defines whether the agent(s) operating on the managed machine have to send the log
events to the specified Simple Network Management Protocol (SNMP) managers. You can choose the
types of events to be sent.

You can override the settings set here, exclusively for the events that occur during backup or during
recovery, in the Default backup and recovery options. In this case, the settings set here will be
effective for operations other than backup and recovery, such as archive validation or cleanup.

You can further override the settings set in the default backup and recovery options, when creating a
backup plan or a recovery task. The settings you obtain in this case will be plan-specific or
task-specific.

For detailed information about using SNMP with Acronis Backup, please see "Support for SNMP (p.
32)".

The preset is: Disabled.

To set up sending SNMP messages

1. Select the Send messages to SNMP server check box.
2. Specify the appropriate options as follows:

Types of events to send – choose the types of events: All events, Errors and warnings, or
Errors only.

Server name/IP – type the name or IP address of the host running the SNMP management
application, the messages will be sent to.

Community – type the name of the SNMP community to which both the host running SNMP
management application and the sending machine belong. The typical community is "public".

Click Send test message to check if the settings are correct.

To disable sending SNMP messages, clear the Send messages to SNMP server check box.

The messages are sent over UDP.

The next section contains additional information about Setting up SNMP services on the receiving
machine (p. 176).

Advertising