Acronis Backup for Linux Server - User Guide - Manual (Page 97)

97 Copyright © Acronis International GmbH, 2002-2014
Selecting MBR
When recovering a system volume, you will usually select the disk's MBR if:

The operating system cannot boot.

The disk is new and does not have MBR.

You are recovering custom or non-Windows boot loaders (such as LILO and GRUB).

The disk geometry is different to that stored in the backup.
There are probably other times when you may need to recover the MBR, but the above are the most
common.
When recovering the MBR of one disk to another Acronis Backup recovers Track 0, which does not
affect the target disk’s partition table and partition layout. Acronis Backup automatically updates
Windows loaders after recovery, so there is no need to recover the MBR and Track 0 for Windows
systems, unless the MBR is damaged.
5.1.1.1 Selecting archive location
Location Details
Cloud storage
If the archive is stored in Acronis Cloud Storage, click Log in and specify the credentials to
log in to the cloud storage. Then, expand the Cloud storage group and select the account.
Exporting and mounting are not supported for backups stored in Acronis Cloud Storage.
Personal
If the archive is stored in a personal vault, expand the Personal group and click the
required vault.
Machine name
Local machine
Local folders
If the archive is stored in a local folder on the machine, expand the <Machine name>
group and select the required folder.
CD, DVD, BD
If the archive is stored on optical media such as CD, DVD, or Blu-ray Discs (BD), expand the
<Machine name> group, then select the required drive. First insert the last disc. Then
insert the discs in order starting from the first one when the program prompts.
RDX, USB
If the archive is stored on an RDX drive or USB flash drive, expand the <Machine name>
group, then select the required drive. For information about using these drives, see the
"Removable devices" (p. 134) section.
Network folders
If the archive is stored on a network share, expand the Network folders group, select the
required networked machine, and then click the shared folder.
If the network share requires access credentials, the program will ask for them.
To specify a Common Internet File System (CIFS) network share which is mounted on a
mount point such as /mnt/share, select this mount point instead of the network share
itself.