Acronis Backup for PC - User Guide - Manual (Page 138)

138 Copyright © Acronis International GmbH, 2002-2014
6.3.2 Steps to perform
To perform a recovery to a manually created virtual machine
1. [Optional] When recovering Windows, prepare Windows drivers that correspond to the target
virtualization platform.
For machines running Linux, the necessary drivers are normally already present in the operating
system.
2. Create a bootable media (p. 164) by using Acronis Bootable Media Builder.
3. Create a virtual machine by using your virtualization product’s native tools.
4. Boot the virtual machine from the bootable media.
5. [When recovering Windows] If you need dynamic volumes, create a volume group by using the
disk management functionality (p. 185).
6. Select Actions > Recover.
7. [When recovering Linux] If you need logical volumes, click Apply RAID/LVM. The LVM structure
will be automatically recreated during the recovery.
8. Configure other recovery settings and perform a recovery in the same way as onto a physical
machine.
The most recent operating systems remain bootable when recovered to dissimilar hardware, or the
VMware or Hyper-V platforms. If a recovered operating system does not boot, use the Acronis
Universal Restore tool to update the drivers and modules that are critical for the operating system
startup. For details, see the Acronis Universal Restore page at http://www.acronis.com/aur/.