Acronis Backup for PC - User Guide - Manual (Page 144)

144 Copyright © Acronis International GmbH, 2002-2014
The Acronis Secure Zone cannot be organized on a dynamic disk.
To allocate space for Acronis Secure Zone
1. Choose a hard disk (if several) on which to create the zone. The unallocated space and free space
from all volumes of the first enumerated disk are selected by default. The program displays the
total space available for the Acronis Secure Zone.
2. If you need to allocate more space for the zone, you can select volumes from which free space
can be taken. Again, the program displays the total space available for the Acronis Secure Zone
depending on your selection. You will be able to set the exact zone size in the Acronis Secure
Zone Size (p. 144) window.
3. Click OK.
7.2.1.2 Acronis Secure Zone Size
Enter the Acronis Secure Zone size or drag the slider to select any size between the minimum and the
maximum ones. The minimum size is approximately 50MB, depending on the geometry of the hard
disk. The maximum size is equal to the disk's unallocated space plus the total free space on all the
volumes you have selected in the previous step.
If you have to take space from the boot or the system volume, please bear the following in mind:

Moving or resizing of the volume from which the system is currently booted will require a reboot.

Taking all free space from a system volume may cause the operating system to work unstably
and even fail to start. Do not set the maximum zone size if the boot or the system volume is
selected.
7.2.1.3 Password for Acronis Secure Zone
Setting up a password protects the Acronis Secure Zone from unauthorized access. The program will
ask for the password at any operation relating to the zone and the archives located there, such as
data backup and recovery, validating archives, resizing and deleting the zone.
To set up a password
1. Choose Use password.
2. In the Enter the password field, type a new password.
3. In the Confirm the password field, re-type the password.
4. Click OK.
To disable password
1. Choose Do not use.
2. Click OK.
7.2.1.4 Result confirmation
The Result confirmation window displays the expected partition layout according to the settings you
have chosen. Click OK, if you are satisfied with the layout and the Acronis Secure Zone creation will
start.
How the settings you make will be processed
This helps you to understand how creating the Acronis Secure Zone will transform a disk containing
multiple volumes.