Acronis Backup for PC - User Guide - Manual (Page 165)

165 Copyright © Acronis International GmbH, 2002-2014

User name and password to be entered on the console side at the connection to the
agent. If you leave these boxes empty, the connection will be enabled without specifying
credentials.
e. [Optional] Network settings (p. 167):

TCP/IP settings to be assigned to the machine network adapters.
f. [Optional] Network port (p. 167):

The TCP port that the bootable agent listens for incoming connection.
g. Licenses to be used:
If Agent for Windows or Agent for Linux is not installed on the machine, specify the license
key or the license server with licenses. The licenses will not get assigned or reassigned. They
determine which functionality to enable for the created media. Without a license, you can
create media only for recovery from the cloud storage.
If Agent for Windows or Agent for Linux is installed on the machine, the media inherits its
functionality.
h. The type of media to create. You can:

Create CD, DVD or other bootable media such as removable USB flash drives if the
hardware BIOS allows for boot from such media

Build an ISO image of a bootable disc to burn it later on a blank disc

Upload the selected components to Acronis PXE Server

Upload the selected components to a WDS/RIS.
i. Path to the media ISO file or the name or IP and credentials for PXE or WDS/RIS.
9.1.1.1 Kernel parameters
This window lets you specify one or more parameters of the Linux kernel. They will be automatically
applied when the bootable media starts.
These parameters are typically used when experiencing problems while working with the bootable
media. Normally, you can leave this field empty.
You can also specify any of these parameters by pressing F11 while in the boot menu.
Parameters
When specifying multiple parameters, separate them with spaces.
acpi=off
Disables Advanced Configuration and Power Interface (ACPI). You may want to use this
parameter when experiencing problems with a particular hardware configuration.
noapic
Disables Advanced Programmable Interrupt Controller (APIC). You may want to use this
parameter when experiencing problems with a particular hardware configuration.
vga=ask
Prompts for the video mode to be used by the bootable media's graphical user interface.
Without the vga parameter, the video mode is detected automatically.
vga=mode_number