Acronis Backup for PC - User Guide - Manual (Page 207)

207 Copyright © Acronis International GmbH, 2002-2014
b. Use encryption – you can opt for encrypted connection to the mail server. SSL and TLS
encryption types are available for selection.
c. Some Internet service providers require authentication on the incoming mail server before
being allowed to send something. If this is your case, select the Log on to incoming mail
server check box to enable a POP server and to set up its settings:

Incoming mail server (POP) – enter the name of the POP server.

Port – set the port of the POP server. By default, the port is set to 110.

User name and Password of the incoming mail server.
d. Click OK.
7. Click Send test e-mail message to check whether e-mail notifications work correctly with the
specified settings.
11.6.4.1 Alert notifications
This option enables you to specify when to send e-mail notifications about alerts which occurred on
the managed machine and to select the types of alerts to send.
When using this option, make sure that the e-mail settings are properly configured in Machine
options > E-mail settings (p. 206).
The preset is: Disabled.
To configure alert notifications
1. Select when to send alert notifications:

As soon as an alert appears – to send a notification every time a new alert occurs.
Click Select the types of alerts... to specify the types of alerts to send notifications about.

On schedule send notification about all current alerts – to send a cumulative alert
notification including all alerts which occurred over a time interval you specify.
Click Select the types of alerts... to specify the types of alerts to send notifications about.
Set up the notification Frequency and Time.
2. Click OK.
11.6.5 Event tracing
It is possible to duplicate log events generated by the agent(s), operating on the managed machine,
in the Application Event Log of Windows; or send the events to the specified SNMP managers. If you
do not modify the event tracing options anywhere except for here, your settings will be effective for
each local backup plan and each task created on the machine.
You can override the settings set here, exclusively for the events occurred during backup or during
recovery (see Default backup and recovery options.) In this case, the settings set here will be
effective for operations other than backup and recovery, such as archive validation or cleanup.
You can further override the settings set in the default backup and recovery options, when creating a
backup plan or a recovery task. The settings you obtain in this case will be plan-specific or
task-specific.
11.6.5.1 SNMP notifications
This option is effective for both Windows and Linux operating systems.