FRIGIDAIRE FGHN2844LF - Manual (Page 15)

15
IQ-Touch
TM
A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
quick ice
Increases the production of ice
water filter Press and hold for three (3) seconds to reset after
filter change.
C/F Touch to toggle display from Fahrenheit to Celsius.
default settings Resets all refrigerator settings such as temp, temp
display and tones to their factory default settings.
Power on-off Press and hold for three (3) seconds to turn off the
cooling system to clean the refrigerator. It also turns off
the ice maker. The temperature displays will read OFF.
Energy Saver Keep this switch set on energy saver (light on) for
lowest energy usage. If moisture appears on the
cabinet between the doors, pressing this button will
turn the light off and enable an electric heater used to
reduce moisture on the cabinet between the doors.
Setting cooling temperatures
Press the “∧” or “∨” indicator to adjust the temperature to the desired setting.
The temperature display will begin to blink with the first touch. The
display will time out after 10 seconds and return to the basic display.
Alarms
Door Ajar If the door has been left open for an extended period
of time, an alarm will sound and the door ajar indicator
will display on the bottom display of the control panel.
The alarm is turned off by closing the door. The mute
sounds key will blink to prompt the reset of any active
alarms. Press this key to reset any system alarms.
High Temp In the event of a high temperature condition, the tem-
perature display will blink and display “HI”. After 20 min-
utes, the alarm will sound and the high temp indicator
will be red on the bottom of the control panel. The mute
sounds icon will illuminate until pressed, acknowledging
the alarm, at which time the highest temperature reached
will be displayed and the refrigerator will resume normal
operation. In case the high temp alarm is not acknowl-
edged at the first alarm sound time out, when the door is
first opened, the alarm sound will be repeated.
Power Fail In the event of a power failure, the power fail alert will
be displayed and the temperature display will blink until
the mute sounds icon is pressed, acknowledging the
alarm. Other modes may be turned off until the alarm is
acknowledged. The power fail alert is turned off and
the refrigerator will resume normal operation. The high
temp alarm may also be illuminated until a safe
operating range temperature has been reached.
IMPORTANT
Pressing the system on-off icon does not turn off power to your
refrigerator. You must unplug the power cord from the wall outlet.
CONTROLS