FRIGIDAIRE FGHN2844LF - Manual (Page 18)

CAUTION
To avoid personal injury or property damage,
handle tempered glass shelves carefully. Shelves
may break suddenly if nicked, scratched, or
exposed to sudden temperature change. Allow
the glass shelves to stabilize to room temperature
before cleaning. Do not wash in dishwasher.
18
STORAGE FEATURES
 NOTE
Features may vary according to model.
Your refrigerator includes SpillSafe TM glass
shelves that are designed to catch and hold
accidental spills.
You can easily adjust shelf positions in the
fresh food compartments to suit your needs.
The shelves have mounting brackets that
attach to slotted supports at the rear of each
compartment.
To change the position of a shelf:
1 Remove all food from the shelf.
2 Lift the front edge up and pull the shelf out.
3 Replace by inserting the mounting bracket
hooks into the desired support slots.
4 Lower the shelf and lock into position.
Shelf features
Drawers
Your refrigerator includes a variety of storage
drawers. These drawers are located in fixed positions
at the bottom of the fresh food compartment.
Full SpillSafe TM Shelf
Half SpillSafe TM Shelf
Crisper humidity control
Crisper drawers include a sliding control for
adjusting the humidity inside the crisper. Leafy
vegetables keep best when stored with the
Humidity Control set on Higher Humidity. Fresh
fruits keep best when stored with the Humidity
Control set on Lower Humidity.
Removing Crisper Drawer
To remove the Crisper Drawer for cleaning:
1 Pull the drawer out until it stops.
2 Lift the front slightly and remove the drawer.
Opening Crisper Drawer
Adjusting Crisper Humidity
Vegetables Fruits
hi lo
Higher
Humidity
Lower
Humidity
humidity control
Crispers
Crisper drawers are designed for storing fruits,
vegetables, and other fresh produce.