Cosmetic covers, Removing the cosmetic covers, Replacing the cosmetic covers – Dell XPS M2010 (MXP061, Mid 2006) User Manual

Page 24

Advertising
background image

Back to Contents Page

 

Cosmetic Covers

Dell™ XPS™ M2010 Service Manual

  

Removing the Cosmetic Covers

  

Replacing the Cosmetic Covers


 

 

Removing the Cosmetic Covers

 

1.

Follow the instructions in

Before Working Inside Your Computer

, including removing the system battery.


 

2.

Turn the computer over and open the display (see

Opening the Display

).


 

3.

Detach the keyboard by grasping the sides of the keyboard and pulling it straight out from the computer base. Set the keyboard aside.

 

4.

Insert a small, flat-blade screwdriver into the slot on the back right corner of the computer, and press the screwdriver in firmly all the way.

 

5.

While holding the screwdriver in, use the notch on the edge of the cosmetic cover to lift the cover up off the computer.

 

6.

Repeat

step 4

and

step 5

to remove the left cosmetic cover.

 

Replacing the Cosmetic Covers

 

1.

Insert a small, flat-blade screwdriver into the slot on the back right corner of the computer, and press the screwdriver in firmly all the way.

 

2.

While holding the screwdriver in, align the tabs on the bottom of the cosmetic cover with the notches in the top cover.

 

3.

Gently push the cosmetic cover down and release the screwdriver.

 

4.

Repeat

step 1

through

step 3

to replace the left cosmetic cover.

 

5.

Firmly attach the keyboard to the computer and close the display (see

Closing the Display

).


 

6.

Turn the computer upside down and replace the system battery (see

Replacing the System Battery

).

CAUTION:

Before performing the following procedures, follow the safety instructions in your Product Information Guide.

NOTICE:

To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your

computer's electronic components. You can do so by touching an unpainted metal surface. If you leave the area, ground yourself again when you return
to the computer.

NOTICE:

To help prevent damage to the system board, remove the main battery before working inside the computer.

1

notch

2

cosmetic cover

3

access slot

NOTICE:

To avoid damage to the keyboard, ensure that you attach the keyboard securely before moving the computer.

Advertising