Dell XPS M2010 (MXP061, Mid 2006) User Manual
Page 36
9.
Seat the computer base onto the hinge arms, aligning the screw holes in the computer base with those in the hinge arms.
10.
Attach the right and left hinge arms to the base using six M2.5 x 8-mm screws.
11.
Connect the solenoid cable to the solenoid card. Thread the cable through the notch and under the frame as shown below.
12.
Replace the video card/thermal-cooling assembly (see
Replacing the Video Card/Thermal-Cooling Assembly
).
13.
Replace the right hard drive (see
Replacing a Hard Drive
).
14.
Replace the right fan (see
Replacing a System Fan
).
15.
Replace the top cover (see
Replacing the Top Cover
).
16.
Replace the cosmetic covers (see
Replacing the Cosmetic Covers
).
17.
Firmly reattach the keyboard to the computer and close the display (see
).
18.
Turn the computer upside down.
19.
Connect the antenna cables from the mini card.
20.
Connect the speaker cable to the connector on the system board (JSPK).
21.
Connect the suspend and solenoid function cable to the connector on the system board (JHING).
22.
Connect the infrared sensor cable to the connector on the system board (JCIR).
23.
Replace the memory module cover (see
Replacing the Memory Module
).
24.
Replace the system battery (see
Replacing the System Battery
).
Back to Contents Page
1
opening on the base
2
solenoid cable
3
solenoid card
NOTICE:
Ensure that you attach the keyboard securely to avoid damage to the keyboard.