Clarion VRX935VD - Manual (Page 39)

VRX935VD
43
English
Owner’
s manual
● “WIDE”: (wide mode)
The image at right and left ends in a display
elongates horizontally.
● “F. WIDE”: (full wide mode)
The whole image elongates horizontally.
● “CINEMA”: (cinema mode)
The image at both top and bottom in a dis-
play disappears.
Notes:
• When a normal 4:3 size image, not being a wide
one, is viewed by displaying it fully on a wide
monitor display in a wide mode or a full-wide
mode, a part of the peripheral image will be lack-
ing or deformed. In deference to the intention of
producer, an original image can be viewed in a
normal mode.
• During superimposed display, it becomes a full-
wide mode.
• When the monitor display size mode is changed,
only the monitor display size indication superim-
posed on the screen (“NORMAL”, “WIDE”,
“F.WIDE” or “CINEMA”) will be changed, then the
corresponding display size mode will be engaged.
Monitoring the CCD camera
The CCD camera can be connected to this unit.
For the power supply of the camera, mount the
power box sold separately (CAA-188).
Notes:
• This function is not available when the display is
stored.
Switching the 2-ZONE/3-ZONE
The front monitor lock and rear monitor lock al-
lows you to enjoy 2-ZONE and 3-ZONE.
2-ZONE:
Use the front monitor lock (or rear monitor lock)
to lock the receiver screen image (or image from
a separately sold rear monitor) to switch the
speaker sound to a sound mode that differs
from the sound accompanying the image.
3-ZONE
When a separately sold rear monitor is con-
nected, use the front or rear monitor lock to lock
the image of the receiver and that of the rear
monitor and to switch the speaker sound to a
sound mode that differs from the sound accom-
panying the image.
Notes:
• The front monitor lock displays the image of an
external device (VTR, TV game console, etc.)
connected to the Visual 2 terminal.
VISUAL Operations
• The rear monitor lock displays the image of an ex-
ternal device (VTR, TV game console, etc.) con-
nected to the Visual 1 terminal.
• When a DVD changer connected to the CeNET is
connected to the Visual 1 terminal, the rear moni-
tor lock cannot be used.
• When 2-ZONE or 3-ZONE is used, the sound
from an external device (VTR, TV game console,
etc.) can only be heard from headphones con-
nected to the external device.
• A rear monitor is a separately sold accessory.