Clarion VRX935VD - Manual (Page 51)

VRX935VD
55
English
Owner’
s manual
Sirius operation
Scan function
There are two scan modes: a category scan
mode and a preset scan mode.
During scanning channels are displayed in ab-
breviated form and the display mode cannot be
switched.
● Category scanning
In a category scan, broadcast channels in the
same category as the current channel are se-
lected about every 10 seconds.
1. Touch the screen in the STANDARD screen.
2. Touch [SUB MODE] to open the SUB MODE
screen.
3. Touch the [CATEGORY SCAN] key.
Note:
• Category scanning is not available when no cat-
egory is defined for the current channel.
● Preset scan
A preset scan scans the channels (up to 18
channels) stored in the preset memory about
every 10 seconds.
1. Touch the screen in the STANDARD screen.
2. Touch [SUB MODE] to open the SUB MODE
screen.
3. Touch the [PRESET SCAN] key.
Always turning on the button
illumination on the operation panel
Note:
• The following operation is enabled when the
panel is open.
• Doing this operation turns on and off the
illunination only for the buttons of VoL [+] and [–],
[DISP], and [OPEN].
The button illumination on the operation panel
when the display is turned upward, can be
switched between “ON” and “OFF”.
The factory default setting is ON.
● “OFF”: Button illumination on the operation
panel turns on for 5 seconds;
● “ON”: Button illumination is always on when
the power is turned on;
1. When the panel is open, press the [ADJ] but-
ton to show the ADJUST MODE menu.
2. Touch the [ ] key to select “UPPER ILLUMI”.
3. Touch the [UPPER ILLUMI] key to select
“ON” or “OFF”.
4. Touch the [ON] or [OFF] key for setting.
5. Press the [ADJ] button or touch the [RTN]
key to return to the previous mode.
∗
To set “ON” again, switch “OFF” to “ON” manually.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for Radio stations, TV sta-
tions and CD changer. The numbers of titles that
can be entered for each mode are as follows.
∗
You cannot enter titles with the unit in Seek, Preset
Scan, Auto store (TUNER or TV) mode. Cancel
each of those operations before entering titles.
1. Press the [FUNC] button to select the mode
you want to enter a title (TUNER, CD
changer or TV).
2. Select and play a CD in the CD changer or
tune in to a Radio station or a TV station for
which you want to enter the title.
3. Touch the screen or press the [LIST] button,
the MENU screen appears.
Other Functions
CD changer mode
CDC655z connected
CDC655Tz connected
CDC1255z connected
DCZ625 connected
Number of titles
60 titles
100 titles
50 titles
100 titles
Mode
TUNER mode
TV mode
Number of titles
30 titles
15 titles