Clarion VRX935VD - Manual (Page 47)

VRX935VD
51
English
Owner’
s manual
TV Operations
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station to that preset memory.
Auto store
Auto store selects 6 TV stations automatically
and stores each one into a preset memory.
If there are not 6 stations with good reception,
stations previously stored in memory remain
and only the strong stations are stored into
memory.
1. Press the [BAND] button and select the de-
sired TV band. (TV1 or TV2)
2. Touch the screen or press the [LIST] button,
the MENU screen appears.
3. Touch the [SUB MODE] key in the MENU
screen, the [AUTO STORE] key appears in
the display.
Touch and hold the [AUTO STORE] key for 2
seconds or longer. The stations with good re-
ception are stored automatically to the preset
channels.
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for desired TV station in memory.
1. Touch the screen or press the [LIST] button,
the MENU screen appears.
2. Touch the [SUB MODE] key in the MENU
screen, the [PRESET SCAN] key appears in
the display.
Touch the [PRESET SCAN] key to start pre-
set scan. The unit starts scanning each sta-
tion for 7 seconds sequentially.
3. When the desired channel is received, touch
the [PRESET SCAN] key again.
Setting the TV diver
∗
This function is enabled only when the panel is
open.
∗
Normally use the TV diver with the “ON” position.
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Press the [ADJ] button to switch to the AD-
JUST MODE menu.
2. Touch the [TV] key to select “TV DIVER”.
Touch the [TV DIVER] key to display [ON]/
[OFF] key.
3. Touch the [ON] key or [OFF] key to set the
selected reception setting.
● ON:
Sets reception emphasizing the visual.
● OFF:
Sets the diver setting to OFF.
4. Press the [ADJ] button or touch the [RTN]
key to return to the previous mode.