Clarion VRX935VD - Manual (Page 45)

VRX935VD
49
English
Owner’
s manual
TV Operations
TV functions
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner.
WARNING
For your safety, the driver should not
watch the TV or operate the controls while
driving. Please note that watching and op-
erating the TV while driving are prohibited
by law in some countries.
Watching TV
Notes:
• For your safety, the VRX935VD has a safety func-
tion which turns off the picture when the car is
moving, so only the audio can be heard. The pic-
ture can only be watched when the car is stopped
and the parking break is applied.
1. Press the [FUNC] button and select the TV
mode.
2. Press the [BAND] button to select the de-
sired TV band (TV1 or TV2). Each time the
button is pressed, the input selection toggles
between TV1 and TV2.
3. Press the [ d ] or [ a ] button to tune in the
desired TV station.
∗
When the panel is open, the same operation
is also available by using the [
a ] and [ d ]
button in the panel.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12V video cassette player (VCP) or video cas-
sette recorder (VCR) to the TV tuner input termi-
nal.
1. Touch the screen or press the [LIST] button,
the MENU screen appears.
2. Touch the [EXTRA SELECT] key in the
MENU screen to select the [VTR] key.
3. To return to the TV broadcast, touch the
screen again and touch the [EXTRA SE-
LECT] key in the MENU screen to select the
[TELEVISION] key.
DVD Changer Operations
This function allows you to control a connected
DVD changer in the same way as described in
DVD player Operation.
For details on operations other than those de-
scribed below, see DVD player Operation. For
details on DVD changer precautions, refer to the
supplied owner’s manual.
Selecting a disc
When the panel is closed :
Each of the [DIRECT] button corresponds to a
disc loaded into the DVD changer.
Press the [DIRECT] button (1 to 6) and select
the desired disc.
When the panel is open :
Press the [LIST] button, otherwise press the
[DISC SEL] button on the remote control unit.
Touch the [DIRECT] key (1 to 6) in the display or
press the numeric button for the disc number (1
to 6) on the remote control unit to select the de-
sired disc.
Switching to a next disc. (Disc Up
function)
The disc up function plays from the first track
(track No.1) of the next disc.
Press the [BAND] button.
Each time you press the [BAND] button, the disc
changes to the next disc.
Disc Repeat playback
This operation plays back all tracks on the disc
repeatedly.
There are 3 ways available :
• Press the [KEY PAD] button and touch the
[D.RPT] key.
• Touch the screen and touch the [SUB MODE]
key. Touch the [DISC REPEAT] key then touch
the [RTN] key.
• Press the [RPT] button on the remote control
unit 1 second or longer.
∗
To cancel the disc repeat play, touch the [D.RPT]/
[DISC REPEAT] key or press the [RPT] button on
the remote control unit.