Cissell CAB438C - Manual (Page 25)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 23 AJ0975
Maintenance
General
This section contains information and instructions
required to perform periodic inspections and lubricate
the press.
Shutdowns due to unscheduled maintenance can be
avoided or minimized by:
● performing periodic inspections as described
and
● performing lubrication services at the time
intervals specified in these instructions.
The following are recommended precautions that
service personnel must understand and apply when
performing general periodic maintenance tasks.
Periodic Inspections
The frequency at which inspections should be
performed, the inspection procedures to be followed,
and the corrective actions to take are listed in Table 3.
If complete details for the inspections and/or
corrective actions are not listed in Table 3, refer to the
referenced paragraphs for detailed instructions.
To avoid possible serious injury:
• ALWAYS shut off services to press
BEFORE removing guards and covers
to do ANY maintenance, service,
set-up, adjustments or repair tasks.
• Shut off AND lock out ALL electric
power to press.
• Shut off AND lock out ALL air service to
press.
• Shut off AND lock out ALL steam
service to press.
• Let heated surfaces cool.
• Be sure moving parts are at a standstill.
• ALWAYS be careful to AVOID spring
loaded components when working
inside press.
• NEVER adjust, clean or dress buck
while indexing press.
• ALL maintenance, services, etc., MUST
be performed ONLY by qualified service
personnel.
W379
WARNING
To avoid possible serious injury ALWAYS
close air supply line shut-off valve AND
lock out air service BEFORE:
• opening filter drain cock
• removing filter bowl
• filling oil bowl
W380
WARNING